Operation Rebuild Chaos Edition Part 7

Doesn't this look sexy!  tapedshut

Two tubes from the side are triangulated for strength and support. This these tubes will support the fenders, lights and hood I needed to make sure it's strong enough to support the weight.

The next two photos show the use of the stock body mount. I ended up cutting it from the frame and relocating it higher by the lights. I made two mounts that holds two tubes to traiangulate the headlamp assembly. The top tube is a single bend to follow the lines of the headlamp and is attached at the back half of the firewall and the front body mount.

Doh the passenger side is bare! hopefully this side will look like the drivers side soon.

the rain from a few days ago did a quick number spank Hopefully I'll have it up and running shortly.